Facebook pixel

Ladybug and Honeybee: From an EPW Weather File to a Design Decision

Written ByPriyanka
Published dateOct 06
Read time6 min

An EPW file is a weather data file that Ladybug and Honeybee read inside Grasshopper to run climate-based analysis, everything from sun radiation to how much energy a building might use. Most Ladybug tutorials stop at the interface, which is a bit like learning where the buttons are and never driving the car.

So here's the whole drive: one EPW file, one Indian city, a radiation study, an energy run, and the one design change that came out of it. You can follow along on your own project.

If you want the tool-by-tool tour first, the full Ladybug tools overview covers it. This post is the applied version.

What an EPW File Is and Where to Get One for an Indian City

An EPW (EnergyPlus Weather) file is a plain-text record of one typical year of weather for one location: 8,760 hourly rows, which is 365 days times 24 hours. Each row carries temperature, humidity, wind speed and direction, and the direct and diffuse solar radiation Ladybug needs to rebuild the sun's position and strength.

The first thing worth knowing as an Indian student: you don't need to settle for a far-off station. ISHRAE (the Indian Society of Heating, Refrigerating and Air Conditioning Engineers) released typical-year weather files for 62 Indian locations, 36 of them entirely new. They're free to download from climate.onebuilding.org. You can also search by map through Ladybug's own EPWmap.

Here's why this matters right now. Buildings account for nearly 30% of India's electricity consumption, and that share is projected to reach 48% by 2042 according to NRDC's analysis of government figures. Cooling is a big reason. The Energy Conservation Building Code (ECBC) exists to bend that curve, and the 2022 amendment to the Energy Conservation Act moves it towards the broader Energy Conservation and Sustainable Building Code (ECSBC). Climate data isn't an academic extra anymore. It's where the brief starts.

For this walkthrough we'll use Ahmedabad: hot and dry, with summer afternoons that regularly cross 40°C. It's a tough, honest test for any facade.

Setting Up the Ladybug Workflow

Start with the weather, and check it loaded before you trust anything.

Drop an EPW file path panel on the canvas and feed it to the Import EPW component. Plot dry-bulb temperature, just to see a year of Ahmedabad drawn out. Then add SunPath and connect the same EPW.

Now look at it. Here's a small fact that surprises people. Ahmedabad sits at roughly 23°N, almost exactly on the Tropic of Cancer. On 21 June, the noon sun is practically overhead, within about half a degree of straight up. On 21 December, it drops to about 43° above the horizon. That's a huge swing.

So the usual advice, a nice deep overhang on the south, only gets you partway. In the Indian summer the sun is high at noon, but it's the low, hard east and west sun in the morning and evening that rakes into rooms. The SunPath component shows you this on your own massing, not in a textbook diagram.

For the test model, use something simple: a three-storey studio block, a plain box with glazing on all four faces. Keep it plain on purpose. When the geometry is simple, the climate is the only thing doing the talking.


Environmental analysis with Ladybug and Honeybee is part of Week 5 in Kaarwan's Rhino & Grasshopper Certification, where you'll run this workflow on a real project.

Running the Radiation Analysis

The radiation analysis shows which facade faces need shading.

Convert your massing to a mesh. Build a Cumulative Sky Matrix from the EPW, set the analysis period to the hottest months (March to June is a sensible window for Ahmedabad), and plug both into the Incident Radiation component. Every face gets coloured by the solar energy that lands on it, in kWh/m².

Here's what came out: the peak reading was about 820 kWh/m² on the west-facing facade, against about 210 kWh/m² on the north face.

Don't read those as exact. They're a relative map, and the pattern is the point. If the west glazing is taking several times the load of the north, that tells you where a shading device, a smaller window or a better glass specification will earn its keep, and where you can stop worrying.

What this means for the design: a lot of glass on the west face is a cooling-load and glare problem in this climate. That's the first thing to question.

Filter the study, too. Run only the occupied hours, say 9 am to 6 pm, and the map shifts. A studio that's empty at night doesn't care about the sun at 7 pm, and your analysis shouldn't either.

Running the Honeybee Energy Analysis

Radiation tells you where the sun lands. It doesn't tell you what that does to a room's temperature or the cooling bill. That's Honeybee's job.

Honeybee takes your geometry and passes it to EnergyPlus. Make rooms from your solids, apply apertures at a set window-to-wall ratio, define a simple construction set and a basic occupancy and cooling setup, then run the simulation. The Honeybee components take your EPW along with it, so the same Ahmedabad year drives the thermal run.

A snag you might hit: some weather files ship with a design-day (DDY) file that has no usable data, and the energy run complains. If that happens, try the same city's file from climate.onebuilding.org, or build your own design days. It's a known quirk, not a sign you broke something.

Then change one thing at a time. Same model, same weather, different window-to-wall ratio on the west face. Read the cooling energy for each version.

The baseline gave about 185 kWh/m²/year of cooling energy. After the change it was about 151 kWh/m²/year.

One honest note. These are early-design numbers for comparing options. They are not a compliance calculation, and they're not something a certifying engineer would sign off on. Use them to choose between schemes, not to promise a client an exact figure.

The Design Decision This Analysis Actually Led To

Here's the decision, in plain words: we cut west-facing glazing from 60% to 35% and added 600 mm deep vertical fins to the west facade.

Why that move and not another? Because the sun on the west is low in the afternoon, a horizontal overhang barely touches it. Vertical fins, deeper reveals or a perforated screen do far more. The radiation map showed the problem, and the energy run confirmed it was worth fixing.

You can see how this connects to practice. A building designed for ECBC compliance has to show its work, and early climate studies like this are where that work starts. The code frames its tiers as roughly 25% energy savings for ECBC, around 35% for ECBC Plus, and 50% or more for Super ECBC, compared with a conventional building. A decision made at massing stage costs you a sketch. The same decision made after the facade is built costs you a retrofit.

If you're comparing Ladybug against other options, how Ladybug compares to other environmental plugins lays that out.


Newer to Grasshopper overall? Start with Kaarwan's Parametric Modelling in Rhino masterclass, then come back to this workflow once the basics feel comfortable.

Limits of This Analysis

Be straight with yourself about what you've got.

A typical-year EPW is a statistical composite, not a forecast. It's great for choosing between options and poor for predicting the exact temperature on a specific afternoon.

The file also describes a weather station, often at an airport. Your site might be a dense lane in old Ahmedabad or a hillside plot, with a different microclimate. Pick the nearest station with a genuinely similar climate and treat the output as guidance.

And a wind rose built from an EPW is regional weather, not airflow through your rooms. For real cross-ventilation you'd need CFD.

None of this makes the analysis weak. It makes it a tool for early decisions, which is exactly where it's strongest.

FAQs

Where do I download an EPW file for an Indian city?

The easiest source is climate.onebuilding.org, which hosts the ISHRAE typical-year files for 62 Indian locations. You can also use Ladybug's EPWmap to search by map and copy the file link.

What's the difference between Ladybug and Honeybee?

Ladybug brings in weather data and runs sun, radiation and wind studies. Honeybee connects your geometry to simulation engines like EnergyPlus and Radiance for energy and daylight.

How accurate is Grasshopper environmental analysis?

It's accurate enough to compare design options early. It isn't a substitute for engineering analysis or code compliance, and a typical-year EPW is a composite, not a forecast.

Do I need Ladybug for a Rhino & Grasshopper course project?

You don't need it, but it's one of the most convincing things to show in a studio review. A sun path and a radiation map on your own project prove you can connect form to climate.

Chat with us

Get the syllabus

View Course

Get the syllabus

View Course
curriculum-background
Phone
curriculum-background

₹3500 first call is on us 🎉

Schedule 1:1 free counselling.

  • Tailored Guidance for Your Success
  • Gain Real-World Insights
  • Life-Changing Conversation
Phone
By submitting, you agree to Kaarwan's Terms and Privacy policy

Get the syllabus

View Course

Get the syllabus

View Course
curriculum-background
Phone
curriculum-background
user-group
Not sure which skills lead to high-paying jobs?Get expert career guidance
Phone
Chat with Uswhatsapp
Priyanka

Priyanka

I’m Priyanka Choudhary, a content writer passionate about architecture, design, and turning complex ideas into clear, engaging stories.

Disclaimer: Views are the author's own and provided "as is" strictly for informational purposes. Kaarwan expressly disclaims all liability for any errors, omissions, or damages arising from this content. For corrections: hola@kaarwan.com.